This is our 1991 Mercedes Benz 190E 2.5-16, the perfect starting point for an Evolution II style replica build. Powered by the legendary 2.5L 16-valve M102 inline-4, it makes 192 horsepower through a 5-speed manual transmission and rear-wheel drive.

• Rare European import 2.5 L inline-4, 16-valve (M102 2.5-16)

• 192 hp & 173 lb-ft torque

• 5 speed manual transmission

• RWD

• 190 Evo II body kit

• Custom paint job

• Modern engine rebuild, suspension, wheel & tires, etc.

• ODO: 190812 km (118565 miles)

• VIN: WDB2010351F916836

190E Engine Upgrades 

• MBZ M102.990 2.5 EVO 96mm bore x 11.5:1 x 87mm stroke x 149mm Rods JE 

• Forged 2618 Aluminum Pistons with Undercrown mill lightning and Piston Guided pins. Pistons are Tuff Skirt Coated, Smooth Crown, Contact Reduction and accumulator grooves are polished.

• 149mm Lightweight Pauter Aluminum Billet 4340 Rods with ARP2000 bolts

• ARP Main Studs with nuts and washers.

• Billiet remote mount Oil filter 

• Internal oil passages of the block are polished and smoothed to reduce friction and increase oil drain back.

• Increased 12mm lift Sport Camshafts, with High Rev spring kit, With Titanium hardware

• Billiet Aluminum  Independent throttle bodies, each sporting a 1000cc Bosh EV14 Injector

• Custom Link GX4 Monson stand-alone ECU with individual coils. Distributor-less ignition

• KW V3 lowering Coil over struts all four corners 

• MB motorwerkz sport steering linkage

• Euro Spec projector headlights and taillights with all LED upgrades